Pre-terminated 8-core

8-core MTP-MTP Pre-terminated Backbone Optical Cable OM3
iCONEC-DTHBTEFFA08H0100

  • Comply with TIA/EIA-568-C.3 and ISO/IEC 11801 relevant standards
  • 8-core multimode OM3 pre-terminated optical cable, with microbending-resistant design
  • Pre-terminated connector (MTP) conforms to IEC-61754-7 and YIA/EIA-604-5(FOCIS 5) definition
  • Adopt LSZH outer jacket, flame retardant meets IEC 60332-3, gas emission meets IEC 60754-2, LSZH emission meets IEC61034-2 Standard
  • MTP parts are used, oval springs are used in the connector to ensure uniform stress on the optical fiber to avoid damage. The head end of male pin is oval. It does not deform after 500 times of plugging and unplugging, thus ensuring the plugging and unplugging accuracy.
  • Splitter snap-in design, tool-free installation
  • Self-owned optical fiber, self-owned optical cable manufacturing capacity and self-owned CNAS certified testing laboratory provide reliability assurance for products
Product Application
  • Product Introduction
  • Product Details

Product Application Scenario
  • Fiber Core

    50/125um

  • Outer Diameter of Cable

    4.5±0.1mm

  • Attenuation of Connector

    ≤0.35dB

  • Return Loss

    25dB

  • Tension

    with its own traction handle, which can bear the tension of 450N

  • Use of bending-resistant ultra-low loss fiber: multimode

    ≤2.4 dB/km@850nm,≤0.6dB/km@1300nm

  • Material Compliance

    RoHS

  • Operating Temperature

    -20 -  60

- +